Pilotseal EPDM

Physical Properties*
Base Polymer                          EPDM
Indentation Hardness          BS903 Part A26 70IRHD –4 +5
Specific Gravity                       BS903 Part A1 1.22 g/cm3
Tensile Strength Min.            BS903 Part A2 9MPa
Elongation @ Break Min.      BS903 Part A2 200%
Min. Cont. Work Temp.                     – 15°C
Max. Cont. Work Temp.                     100°C
Max. Intermittent Work Temp.       110°C
Compression Set 70°C 22 Hours      BS903 Part A6 20%



PILOTSEAL EPDM is available in sheet and rolls and is typically used in applications where resistance to Ozone, Ageing and UV are required.

Applications and Characteristics
Food Use Not recommended
Water Use Fair
Mineral Oil Use Not recommended
Abrasion resistance Good
Ozone weather resistance Excellent
Flame retardency Not recommended
Electrical resistance Not recommended
General Purpose Not recommended
Approvals and Compliance
WRAS approval for cold water only

Sizes Available
Thickness Range 1 to 6mm 10m rolls
Thickness Range 8 to 25mm 5m rolls
Standard Width 1.4m

* Typical Shore Hardness range 40—70 also available