Pilotseal Commercial
Description
Beldam Crossley PILOTSEAL Commercial grade rubber is manufactured from a high grade natural rubber (latex compound) mixed with SBR (Styrene Butadiene Rubber) in order to provide a hard wearing general purpose material.
PILOTSEAL Commercial is suitable for applications where there is no contact with oils and greases and not subject to weather and environmental changes
Applications
- Food Use Not recommended
- Water Use Fair
- Mineral Oil Use Intermittent
- Abrasion resistance Moderate
- Ozone weather resistance Not recommended
- Flame retardency Not recommended
- Electrical resistance Not recommended
- General Purpose Excellent
Sizes Available
- Thickness Range 1 to 6mm 10m rolls
- Thickness Range 8 to 25mm 5m rolls
- Standard Width 1.4m
Base Polymer |
Natural / SBR |
Indentation Hardness |
ASTM D224000 65 Shore A –4/+5 |
Specific Gravity |
ASTM D792 1.5 g/cm3 |
Tensile Strength Min. |
ASTM D412 3MPa |
Elongation @ Break Min. |
ASTM D412 250% |
Min. Cont. Work Temp. |
– 30°C |
Max. Cont. Work Temp. |
70°C |
Max. Intermittent Work Temp. |
90°C |
Compression Set 70°C 22 Hours |
ASTM D395 Meth B 30% |
PTFE Design
Beldam Crossley can create PTFE products to your specification, creating a product with the correct PTFE grade material that works best for your application.
Contact our team of design engineers with your requirements and see how we can help you.
Crossflon®
Beldam Crossley has been moulding PTFE for over half a century. We have since developed a wide range of High Performance Crossflon® materials, each suited to a specific application.
